You could have dropped your iPad, or let a younger relative mess with it, or it may have simply frozen and gone blank on its own. Regardless of how it happened, your iPad won’t turn on, no matter what you try.
If you’re now stuck, shouting in frustration “My iPad won’t turn on”, then don’t worry. There are a ton of reasons why your iPad won’t turn on or may be stuck on the Apple logo. So, regardless of how it happened, if your iPad won’t turn on, here’s what you need to do.
The first and most important step when your iPad won’t turn on is correctly identifying the reason why. Luckily, this is easier than it sounds.
There are typically three main reasons why your iPad won’t turn on. Essentially, it comes down to either the battery, software, or hardware issues.
If your iPad doesn’t turn on unless you plug it in, then there’s a decent chance that the issue here is a dead battery.
But if your iPad won’t turn on even when plugged in, then you might have a problem with either the software or hardware.
Charge Your iPad
If your iPad doesn’t turn on and is stuck on a black screen, then charging your iPad is a good starting point.
Battery issues are some of the most common reasons behind an iPad doesn’t turn on. If your iPad is out of power, then it won’t be able to turn on, after all.
Start by charging your iPad. If this isn’t working, ensure that the charger is plugged in and working with other devices, as the issue could simply be a faulty charger.
If your iPad doesn’t turn on even when plugged in, then it’s time to try some of the other solutions on this list.
Adjust the Brightness
It’s possible that your iPad is already on, but that the brightness has just been set so low that you can’t see the screen. This is particularly likely if you just lent your iPad to somebody who might have adjusted the settings.
The problem here is that you may’t adjust the brightness settings if you can’t see. To solve this problem, try asking Siri to increase the brightness. If Siri responds, then you should have your iPad working again in no time.
Try Third-Party Software
If these solutions haven’t worked, then your best bet might be trying a third-party software to fix the issue.ReiBoot - iOS system repairis a third-party software that can fix and repair over 150 system problems for iOS.
It can also be used to update your iOS version and does all of this without any risk of data loss. Here’s how to use it.
Try a Force Restart or Hard Reset
Alternatively, you can try a force restart (also known as a hard reset) of your iPad. To do this, all you have to do is hold the home button and the power button until you see the Apple logo appear.
If you have a newer model, say an iPad Pro that won’t turn on, then the process is a little more complicated. You’ll need to quickly press the volume up button, then the volume down button, and then hold the power button until you see the Apple logo appear.
You can also try putting your iPad into recovery mode. This lets you plug it into your computer to try and repair it. The process will differ based on your model, so if your iPad Pro won’t turn on, you’ll need to follow a different procedure from a plain iPad, for example.
You may want to be careful at this step, however. If your iPad does not turn on, and you plug it into your computer in recovery mode, your first instinct may be to go for theRestoreoption. This will delete all of your data in the process of repairing your iPad, which is often only useful as an absolute last resort.
Update Your iPad
Another option you can try if your iPad won’t turn on is to update it. This can be difficult if your iPad won’t turn on or is stuck on the Apple Logo, however. One option you can use is to use the program ReiBoot mentioned above to update your iPad, though this way does have some chance of data loss, so is recommended largely as a last resort.
Contact Apple Support
If you’ve tried all of the above solutions, and you still have an iPad that won’t turn on, then it may be time to contact Apple Support. This means that the issue is probably a hardware problem, which will require someone to physically open your iPad and tinker with whatever is broken inside.
Tips to Keep In Mind
The easiest way to fix an iPad that won’t start is to prevent that from happening in the first place. If you’re careful with your iPad, keep it well charged and well looked after, then it’s less likely to freeze in the first place.
There are also other avenues you can follow. If you need to knowhow to fix an iPad that won’t turn on, then you can always search those out as well.
Frequently Asked Questions
There are many reasons why an iPad won’t turn on with a black screen. The best solution would be to work through the list of solutions provided, though the most likely is some sort of issue with either the iPad’s battery or the charging cable.
If your iPad will not turn on even when plugged in, then it is probably a hardware or software issue instead.
Will I lose everything if I reset my iPad?
If your iPad doesn’t turn on, then resetting your iPad may seem like the only solution left to you. If you’re not careful, this can result in loss of data such as photos, messages, and apps.
This problem can be mitigated with third-party programs such as ReiBoot, however. This is because ReiBoot is designed from the ground up for when your iPad won’t turn on, even if it’s stuck on the Apple logo or a black screen.
Fix Any Problem With Your iPad
So, there you have it. If your iPad doesn’t turn on, then not all hope is lost. Even if your iPad is stuck on the Apple logo or has a black screen, there are still some options that you may use to try and fix it.
The optimal option for preserving your data and safely restoring your iPad would be to use ReiBoot, but there are plenty of alternatives as well.
